Contact

Laser Components USA, Inc.
116 South River Road
Building C
Bedford, NH 03110
USA
Use our REQUEST FORM*
or call us +1 603 821 7040
* by clicking on this link you will be redirected to an external site
  • English

High Power Multimode Assemblies

Since 1995 we have been producing fiber assemblies for the transmission of high laser powers in Olching. Due to controlled clean room conditions, we can guarantee a high level of cleanliness at the fiber front. You have the choice between D80, SMA or DIN connectors as well as a large selection of protective jackets. On request, we can also provide your cables with Modestrip technology or an AR coating.

Assemblies with Coatings

Fiber assemblies with coated fiber ends to avoid disturbing reflections and metallizations for the hermetically sealed assembly of optical fibers in metal housings.

The fiber ends are equipped with AR coatings to avoid disruptive reflections (physically always 4% on the fiber/air boundary). All desired wavelengths, such as, for example, 532 nm, 808 nm, 980 nm, 1064 nm, 1310 nm, 1480 nm, and 1550 nm can be implemented.

The coatings are available as single AR coatings (anti-reflection for a single wavelength), dual AR coatings (anti-reflection for two wavelengths), or broadband AR coatings (anti-reflection for a wide wavelength range).

Coated fiber optical cables are used in power transmission, medical technology, and material processing.

In principle, all fiber types can be equipped with an AR coating, if all the materials used are suitable for use in a high-vacuum environment and do not outgas.

Metallized pigtails are available for the hermetically sealed assembly of optical fibers in metal housings. The fibers are coated with a nickel / gold layer and can therefore be directly soldered into metal housings and feedthroughs. Any quartz fiber can be metallized. Some of the typical layer thicknesses are as follows: <1 µm for the nickel layer and 0.5 – 1.0 µm for the gold layer on top. The metallization lengths are between 3 and 40 mm.

The gold layer can be applied with tight tolerances and sticks very tightly to the fiber. Coated and soldered 125-µm fibers withstand, for example, pulling forces of more than 10 N.

Applications are extremely multifaceted. A few examples include:

  • Laser diodes in the field of telecommunications
  • External modulators
  • Pump laser diodes
  • High power arrays
  • Fiber optical sensors for harsh environmental conditions

Your contact person

Huyen Vu
Use our request form*

+1 603 821 7040

* You will be redirected to an
external website created by Laser Components USA.